Bodas IntelligentBroad and diligent, with Nobida
Contact:Post-press equipment:+86-137 9015 8385
Laboratory equipment:+86-130 0682 2948
This machine is mainly used for the mixing of rubber, plastics and chemical raw materials, and is also suitable for the mixing of various low-viscosity materials. The machine is accurate in temperature control, uniform in dispersion, simple and practical, and is suitable for laboratory formulation development and small-scale production.
Product durability:
1. The transmission adopts a hardened gear reducer, which has stable transmission, low noise and long service life.
2. The mixing chamber is made of alloy steel, and the surface is plated with hard chrome, which is wear-resistant and beautiful.
3. The rotor is made of alloy steel, which is hardened as a whole and plated with hard chrome, which is smooth and wear-resistant. The rotor is hollow and can be cooled or heated (steam, oil heating).
4. The sealing structure adopts self-lubricating dry mechanical pressing shaft seal, and the other end adopts oil pressure pressing method.
5. The power output speed of the main drive system adopts stepless frequency conversion speed regulation.
MODEL NO. | BDS-LAM200 |
EXTERNAL SIZE | L1300*W800*H2000 |
Voltage/Total Power POWER | 380V/5.5KW |
AIR PRESSURE | 0.4-0.8MPA |
Machine Material BUILD MATERIAL | Carbon steel, etc. |
Weight WEIGHT | 1200Kg |
HEAT METHOD | Electric heating |
TEMPERATURE RANGE | Room temperature~300℃ |
TEMPERATURE ACCURACY TEMPERATURE ACCURACY | +/-2°C |
REVERSED METHOD | Motor overturning and feeding |
ROTATE ANGLE | 110° |
ROTATOR SPEED | 0-50 r/min inverter speed regulation |
ROTATOR SPEED RATIO | 1:1.27 |
COOLING METHOD | Tap water cooling |